Skip to content
Interior design

Interior design in Dubai Considered from the first line to the last detail.

Homes and businesses across Dubai and Abu Dhabi, designed by the team that also builds them — so the space you approve in 3D is the space that gets delivered.

  1. 01 First, the plan Every room starts as a drawing.
  2. 02 Then, the walls Heights, openings and the line of every wall, drawn first.
  3. 03 The finishes Stone floor, plaster walls, sheers at the window.
  4. 04 Joinery Fluted oak and a lit niche, made in our Al Quoz factory.
  5. 05 Furnished Every piece placed on the plan first.
  6. 06 Light Daylight gives way to cove, pendant and lamps.
  7. 07 Installed Designed, drawn and installed by our team.
Skip the animation

★★★★★ 4.8 out of 5 from 62 Google reviews Read our client reviews

At a glance

Interior design in Dubai, in short.

Scope
Space planning, 3D visualisation, materials, lighting, joinery detailing, technical drawings and a bill of quantities.
Where we work
Homes and businesses across Dubai and Abu Dhabi, from single apartments to full commercial floors.
Who builds it
The same company: designers, project managers, joiners and site teams under one contract.
Joinery
Made at our own factory in Al Quoz Industrial 4 and installed by our team.
Before you commit
A design you have walked through in 3D, costed line by line.
Client rating
4.8 out of 5 from 62 Google reviews.
Designed around you

We start with the person, not the room. The design follows from how the space will actually be used.

What is included

What interior design covers.

01

Space planning

Circulation first, furniture second. Where you enter, where things are put down, where the light falls at different hours, and how the space behaves when it is full and when it is empty. Most of the value of a design is decided here, before a single finish is chosen.

02

Concept and 3D visualisation

Concepts, layouts and mood boards develop into a single design direction, then into 3D you can walk through before anything is committed.

03

Materials and finishes

Finishes, surfaces, furniture, lighting and fixtures, chosen for how they behave over years rather than how they photograph on day one — including how they age in this climate and how they are cleaned.

04

Lighting design

Layered lighting — ambient, task and accent — coordinated with the ceiling and the joinery, so one room can carry a working morning and a dinner without changing anything but the light.

05

Joinery detailing

Kitchens, wardrobes, media walls and reception desks detailed by the team that makes them in our own workshop, and cut for the actual opening rather than a standard module.

06

Technical drawings

Technical drawings and a full bill of quantities, so the design is costed line by line and the build has no open questions in it.

How a design project runs

Six stages, from the first conversation.

The sequence every NITS project follows. The first three stages are the design itself; the last three build it and hand it over.

  1. Initial Consultation

    We start with the person, not the room. Requirements, lifestyle or business need, budget, objectives and the real conditions of the site.

    • Requirements
    • Lifestyle
    • Budget
    • Site conditions
  2. Design & Development

    Concepts, layouts and mood boards develop into a single design direction, then into 3D you can walk through before anything is committed.

    • Concepts
    • Layouts
    • Mood boards
    • 3D visualisation
  3. Material Selection

    Finishes, surfaces, furniture, lighting and fixtures are chosen for how they behave over years, not how they photograph on day one.

    • Finishes
    • Surfaces
    • Lighting
    • Textures
  4. Project Planning

    Scope, timeline, procurement, vendors and technical execution are fixed and costed, so the build has no open questions in it.

    • Scope
    • Timeline
    • Procurement
    • Budget
  5. Design Implementation

    Fit-out, joinery, civil works, MEP, installation and finishing — delivered by one accountable team rather than coordinated across five.

    • Fit-out
    • Joinery
    • Civil
    • MEP
    • Finishing
  6. Post-Project Follow-Up

    Final walkthrough, quality check and handover, then continued support once you are living or working in the space.

    • Walkthrough
    • Quality check
    • Handover
    • Support
Design studio
Design studio
Design and build

Designed by the team that builds it.

Clients are often asked to choose between a studio that can imagine a space and a contractor who can build one. The gap between the two is where budgets slip and the finished room stops resembling the drawing. Our designers, project managers, joiners and site teams work under one roof, on one contract.

  • Drawings a site team can build from

    Site teams sit in design reviews, so details are drawn for the people who will build them.

  • Joinery from our own workshop

    Fitted pieces are made to the opening and installed by our own team.

  • One project manager

    One point of contact from the first consultation to handover.

Turnkey fit-out

Before you start

Questions to settle before you appoint a designer.

01

How to compare interior design companies

Most shortlists are built from photographs, and photographs show the finish without saying much about how a company works. Ask each interior design company in Dubai the same four questions: who draws the technical details, who builds them, who makes the fitted joinery, and who you will deal with once work starts on site.

Then ask to see work close to yours in type and scale. Our recent projects include a boutique retail concept at City Walk, an advisory office in DIFC, a family villa in Jumeirah and a penthouse in Dubai Marina, all in the portfolio. Read what clients say about the process as well as the result. Our Google reviews stand at 4.8 out of 5 from 62 reviews.

02

Separate contracts, or one

You can appoint a designer and a contractor separately, or one company to design and build. Separate appointments work when someone owns the interfaces: the drawings the contractor prices, the joinery that has to meet the services, the changes made after approval. Without that owner, each party can reasonably say a problem belongs to the other.

We work on one contract. Our designers, project managers, joiners and site teams sit under one roof, and site teams join design reviews so details are drawn for the people who will build them. Whichever route you choose, put the responsibilities in writing before you compare prices. The turnkey fit-out page sets out what a single contract covers.

03

What the design stage should produce

Interior design in Dubai is sold under many names, from styling to full interior architecture, so ask what you will hold at the end of the design stage. With us it is a set of decisions you can build from: layouts planned around circulation, one design direction you have walked through in 3D, selected finishes, a lighting scheme in three layers, joinery details and technical drawings.

The bill of quantities is taken from those drawings, line by line, so the cost is visible before anything is ordered. If a proposal ends at mood boards and renders, someone still has to produce that information before a contractor can price the work accurately. Ask who that will be and what it will cost. Each stage is described on how a project runs.

04

Where a luxury budget goes

Luxury interior design in Dubai is often judged by the finish: the marble, the brass, the imported light fittings. Those items are simple to compare between quotes. The decisions that cost more to correct come earlier. A layout that wastes floor area, storage that does not fit what you own, lighting that cannot be dimmed and joinery made to a standard module are all expensive to put right once built.

A budget is set by the scope, the specification and how much is made to measure, together with anything the existing building needs before new work goes in. Read the allowances for items not yet chosen with particular care. Our guide to whether the cheapest quote can cost more lists seven places where a quotation can leave costs open.

Google reviews

In our clients’ own words.

Questions

Questions about interior design.

Can I see the design before anything is built?

Yes. Concepts, layouts and mood boards develop into a single design direction, which is presented in 3D so you can walk through it before anything is committed.

Do you also build what you design?

Yes. Design and execution sit under one contract: fit-out, joinery, civil works, MEP, installation and finishing are delivered by one accountable team. See turnkey fit-out.

Do you design homes and businesses?

Both — villas, apartments, townhouses and penthouses, and offices, clinics, retail, restaurants, salons and hospitality — across Dubai and Abu Dhabi.

How is the cost of a project set?

Once the design is developed, the scope, timeline and procurement are fixed and costed in the project planning stage, with technical drawings and a full bill of quantities — so you approve a design against a cost you have seen itemised.

Where is the joinery made?

In our own workshop at our factory in Al Quoz. Kitchens, wardrobes, panelling, vanities and reception desks are made to the opening they will occupy and installed by our team.

What should I bring to the first consultation?

Whatever you have: a floor plan, drawings or photographs of the space, and a sense of how you want to use it and what you want to spend. We are happy to look at drawings before you commit to anything.

How quickly will you reply to an enquiry?

A designer reads every enquiry and replies directly, usually within one working day.

Do you handle interior architecture as well as decoration?

Yes. Our work starts with space planning: circulation, where the light falls and how each room is used. Where the plan needs it, walls, ceilings and services change too, and structural work goes ahead only with engineer sign-off and the relevant approvals in place. Finishes, furniture and styling then follow from that plan.

Is one design-and-build contract more expensive than hiring separately?

The fair test is two proposals priced against the same drawings and specification. With one contract you are not coordinating a designer, a contractor, a joiner and an MEP subcontractor yourself, or paying for the gaps between them. Compare inclusions, allowances and exclusions alongside the totals before you decide.

How do you design the lighting?

In three layers: ambient light for the room, task light where work is done and accent light for the things worth seeing. The layers sit on separate dimmable circuits and are coordinated with the ceiling and the joinery in the drawings, so one room can serve a working morning and a dinner.

Start a project

Tell us about the space.

A few details let us come back with something considered rather than generic. We reply to every enquiry from the design team, not a call centre.

SpaceWhat are we designing?
ConfigurationWhat is the configuration of your space?
Type of spaceWhat kind of space is it?
HandoverWhat is the property’s handover status?

Design can start before the keys arrive. It is how the best projects finish on time.

StartWhen would you like to start?
ScopeWhat would you like us to take on?
SiteWhere is the space?

Not listed? Type the name or address and press Enter.

SizeRoughly how big is it?
NotesAnything we should know?
YouWhere should our designer reach you?

With the country code, e.g. +971 50 123 4567.

Best way to reach you